Shopping Cart
Your cart is empty.






Gunsmith Tools

Displaying products 1 - 30 of 33 results
Page 1 of 2 Page 12movenext
AK-47 7.62x39 Gas Port Extended Drill Bit
Price: $5.95
ratingratingratingratingrating
AK-47 7.62x39 Gas Port Extended Drill Bit
These are the drill bits I use for drilling gas ports. These will fit into the port and it will guide the drill. Just press the gas block on first. This works on the Romanian, Polish, Egyptian, Russian, and AMD65 style gas blocks.
AK47 Trigger Guard Riveting Jig
Price: $65.00
ratingratingratingratingrating
AK47 Trigger Guard Riveting Jig
This jig will install the five trigger guard rivets. The front four rivets can be set at once and the rear will be done separately. There is a magnet that holds the rear rivet support to keep it from falling off.
AK-Builder Barrel Press Kit 1"
Price: $95.00
ratingratingratingratingrating
AK-Builder Barrel Press Kit 1"
AK-Builder barrel removal and installation kit designed for press with 1 inch ram (most 12 ton presses such as the Harbor Freight model have a 1 inch ram)
AK-Builder Barrel Press Kit 1.5"
Price: $95.00
AK-Builder Barrel Press Kit 1.5"
AK-Builder barrel removal and installation kit designed for press with 1.5 inch ram (most 20 ton presses such as the Harbor Freight Orange 20 ton model have a 1.5 inch ram). The new grey Harbor Freight 20 ton requires the 1.6
AK-Builder Flat Bending Die Set
Price: $179.00
ratingratingratingratingrating
AK-Builder Flat Bending Die Set
AK-Builder Flat Bending Die Set 1mm or .040" Punch. All of the flats we sell are 1mm and correct for this Die
AK-Builder Rivet Tool
Price: $250.00
ratingratingratingratingrating
AK-Builder Rivet Tool
Are you ready for a completely new riveting tool? This is based on Plinker's original riveting jig as well as a modification from another AK gunsmith and upgraded with AK-Builders own special touches. THIS WILL INSTALL THE FRONT/REAR TRUNNION RIVETS AND C
Cobalt Gas Port Drill for Bulgarian AK74's
Price: $3.95
ratingratingratingratingrating
Cobalt Gas Port Drill for Bulgarian AK74's
This drill is .076" and the original port size is .077". More than likely with a cheap drill press or hand drill the bit will cut oversize so it won't really matter. See full description for more details
unavailable
1.5mm or .063" Punch
Price: $80.00
1.5mm or .063" Punch
1.5mm or .063" Punch
17/64 mm Cobalt Metric Jobber Length Drill Bit, Drill America
Price: $6.99
17/64 mm Cobalt Metric Jobber Length Drill Bit, Drill America
This heavy duty cobalt jobber length drill bit is perfect for initially drilling the barrel pin hole so you can properly ream the pin hole for 7mm
unavailable
3 Pack Cobalt Drill bit set for barrel installation
Price: $15.00
ratingratingratingratingrating
3 Pack Cobalt Drill bit set for barrel installation
3 pack cobalt drill bits for barrel assembly. Includes a 3mm, 5/32, and 7mm for drilling all necessary holes. (front sight, rear sight, gas block, and barrel pin). We can swap the 7mm for 17/64 if requested for no extra change
3mm Cobalt Jobber Drill Bit *Drill America*
Price: $3.99
3mm Cobalt Jobber Drill Bit *Drill America*
This heavy duty cobalt jobber drill bit is perfect for drilling the front sight and gas block pin holes onto the barrel for all AK's
4mm Cobalt Jobber Drill Bit *Drill America*
Price: $3.99
4mm Cobalt Jobber Drill Bit *Drill America*
Good for drilling trunnion and rear sight holes. This heavy duty cobalt jobber drill bit will last a long time
5.00mm HSS Straight Shank Chucking Reamer
Price: $14.99
5.00mm HSS Straight Shank Chucking Reamer
For finishing the AK-Builder flat hammer and trigger holes. These will ensure that you have perfectly round holes for the axis pins to go through. You will want to run these at a slow speed and use some cutting oil if you have some.
unavailable
5.45x39 Field Gauge
Price: $32.50
5.45x39 Field Gauge
Made in the USA by Manson Precision - these are the best head space gages on the market! Field gauges are essential tools for ensuring a safe chamber on used rifles and a must have for AK shooters.
5/32 Cobalt Jobber Drill Bit *Drill America*
Price: $3.99
5/32 Cobalt Jobber Drill Bit *Drill America*
Good for drilling trunnion holes. This heavy duty cobalt jobber drill bit will last a long time
7.00mm Cobalt Metric Jobber Length Drill Bit, Drill America
Price: $6.99
7.00mm Cobalt Metric Jobber Length Drill Bit, Drill America
This heavy duty jobber length drill bit is the proper size for 7mm barrel pins. The best way to do it is to drill at 17/64 and ream at 7mm but for those with a really good drill press that like to drill once at 7mm and pin it this is for you
7.00mm HSS Straight Shank Chucking Reamer
Price: $14.99
7.00mm HSS Straight Shank Chucking Reamer
Perfect for reaming the barrel pin hole after drilling for 17/64 to ensure a perfectly concentric hole
AK Alignment Jig-AK47 By Requiem Arms
Price: $59.95
ratingratingratingratingrating
AK Alignment Jig-AK47 By Requiem Arms
Align the front sight, gas block and rear sight on your AK PERFECTLY, everytime! Whether you're a pro builder or a home builder, our patented AK Alignment jig is a must. Even works on guns that all the parts are already installed-simply drive out th
AK Alignment Jig-AK74 By Requiem Arms
Price: $59.95
ratingratingratingratingrating
AK Alignment Jig-AK74 By Requiem Arms
Align the front sight, gas block and rear sight on your AK PERFECTLY, everytime! Whether you're a pro builder or a home builder, our patented AK Alignment jig is a must. Even works on guns that all the parts are already installed-simply drive out th
AK Barrel Drilling Tool
Price: $119.95
AK Barrel Drilling Tool
This tool, made of 4140 steel and then NITRIDED to 60C, is for drilling the crosscut and the gas blocks on barrels. Comes with all hardware, base, lower hand guard retainer drilling block, 3mm gas port drilling block and 2mm gas port drilling block.
AK HAMMR Magazine Release Tool
Price: $24.99
AK HAMMR Magazine Release Tool
The AK H.A.M.M.R.™ was developed as an enhancement for AK-47 style rifles. AK H.A.M.M.R.™ stands for "AK Hybrid Adaptive Magnetic Magazine Release. The hybrid designation comes from the fact that the AK H.A.M.M.R.™ can be used as a semi-permanent magazine
AK Trunnion Rivet Hole Drilling Fixture
Price: $65.00
AK Trunnion Rivet Hole Drilling Fixture
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers. This tool will work with 7.62 trunnions
AK-Builder Barrel Press Kit 1.6
Price: $99.00
AK-Builder Barrel Press Kit 1.6
1.6" ram pieces are machined on a lathe from bar stock then black oxided. The 1.6" ram is for the new grey 20 ton Harbor Freight shop press.
AK-Builder Receiver Blank Drilling Fixture 7.62 & 5.45
Price: $89.95
ratingratingratingratingrating
AK-Builder Receiver Blank Drilling Fixture 7.62 & 5.45
AK-BUILDER Receiver Blank Drilling Fixture This tool is made specifically for the Polish 7.62 x 39 and 5.45 x 39 receiver blanks that were just imported. The fixture is machined and heat treated to last through the drilling of several blanks.
Arms of America Gift Card $25.00 *Never Expires and order as many as you need to achieve required value*
Price: $25.00
ratingratingratingratingrating
Arms of America Gift Card $25.00 *Never Expires and order as many as you need to achieve required value*
This gift card never expires and has no limitations or restrictions. We will email you the gift card # after your order is placed and feel free to order whatever increments you need.
tax free
Barrel Press Plate
Price: $29.95
Barrel Press Plate
This tool is used to hold your barrel perfectly while pressing on your front trunnion. Best when used in conjunction with our Press Block. Will work for 74's as well as 47's. Not for over sized barrels. One side is a flat hole and the other si
Harbor Freight Extended Spot Welder Tip for Model 45689
Price: $16.99
Harbor Freight Extended Spot Welder Tip for Model 45689
Spot Welder Tip for Harbor Freight Welder part number 45689 (will not work with their new model 61205) This tip will help create more pressure for welding while using our lower tong. This threads into the upper tong of the Harbor Freight welder.
Harbor Freight Extended Upper Spot Welder Tip for Model 61205-61206
Price: $19.99
Harbor Freight Extended Upper Spot Welder Tip for Model 61205-61206
Upper Spot Welder Tip for Harbor Freight Welder part number 61205-61206 (will not work with their old model 45689) This tip will help create more pressure for welding while using our lower tong. This threads into the upper tong of the Harbor Freig
Muzzle Press Nut- By Requiem Arms
Price: $19.95
ratingratingratingratingrating
Muzzle Press Nut- By Requiem Arms
Never use a penny or anything else again to press your barrel! Sleeve and removable and adjustable brass insert. Sits the brass flat against the muzzle and distributes the weight and surface area evenly. Has multiple uses; See detailed description
Requiem Advanced Rivet Drilling Tool
Price: $39.95
Requiem Advanced Rivet Drilling Tool
Clamp it on with vise grips, c clamps, etc. and drill out any rivet on your ak 47 or ak 74. Can also be used to make perfect rivets with the Plinker Jig!!! Made from solid 4140 treated. Identical to the simple rivet drilling tool, but can also dr
Page 1 of 2 Page 12movenext
Search
Mailing Lists


Browse Categories