AK-47 Receiver Side Plate (Romanian style) ON SALE!


Price: $12.99
Average Rating
ratingratingratingratingrating
See Reviews

Description

  • Works with all AK47/AK74 Scope Mounts!
  • Steel
  • Rivet Style
  • Romanian AK-47/74 Spec
  • Does not include installation rivets - see our AK Build Rivet sets

Product Reviews

Product Reviews

Rate This Product:
or Create a Review
(28 Ratings, 4 Reviews) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Dissapointing
Banderson (UT) 6/4/2018 7:21 PM
These rail have been around for a long time and nobody has bothered to fix the holes yet? In fact, they have gotten worse. It use to be the rear hole was the only one that needed to be fixed. Now both the rear and the middle holes are off. Someone needs to pull their head out and start making these right.
ratingratingratingratingrating
Improper hole alignment. Needs some work to fit right
Newm (WA) 1/11/2018 11:48 AM
The far right rivet hole needs to be plug welded and re-drilled in order to aligned with the rear trunnion hole. Back of the mount isn't completely flat and could use some lapping. Not a ton of work, but somewhat annoying. Someone at the factory had just one simple job, but he failed.
ratingratingratingratingrating
Good quality not what I needed though
Joey (Ohio) 12/27/2017 11:16 AM
This is a good quality rail that fit my UTG mount very well, but I also found it had hole spacing issue. Without either removing a fair amount of material or plug welding the holes it will not fit an AKM47 with a fixed stock rear trunnion. It may work better on some other AK variants.
ratingratingratingratingrating
Good product, needs a little work
Kevin (Left Coast) 4/29/2016 1:27 PM
Good rails, with a hole spacing issue. The rear hole is about 3mm too far aft and the middle hole is about 1 to 2mm too far forward. Easily dealt with and they do have a nice matte type finish.