KOLARMS KAM-17 Gen 2 - Slovakian AK47 Rifle Parts Kit - ULTIMATE DO IT YOURSELF KIT!

Non-headspaced kits ship within 7-10 business days. Headspaced kits subject to Headspacing leadtime displayed in our FAQ
$489.00 $449.00
(15 reviews) Write a Review

Out of stock

Out of Stock

AK47 Rifle Parts Kit: Slovakian

  • All New Production Virgin AK Parts kit G2 Model
  • These are not Surplus Kits 
  • Imported from Slovakia
  • Made by Kolarms
  • AKM Kit Model KAM-17
  • 7.62x39mm semi auto
  • Phosphate Finish
  • Forged front & rear trunnion, Bolt
  • Trunnion Heat treated to approx Rockwell 41
  • New! Barrel trunnion adjusted to work with 23 mm barrel journals no extra work needed 
  • New! Gas port has been drilled no extra work needed  2/6/21 G2
  • Gas block does have bayonet lug
  • Parts are very robust including stamped parts 
  • Will work with any standard AK stock set both wood/poly
  • Very extensive kit with most parts included  
  • Kit can ship to you no FFL needed as this is not a complete firearm 

Kolarms was established in 2008 refurbishing weapons for the Film making industry and civilian collectors. Their business focused on upgrading weapons from the USSR, Czechoslovakia, Poland, Hungary, Romania, Bulgaria or former Yugoslavia. As the demand for their work grew they are now producing several lines of new firearms including the AK47 / AKM patterns rifles.

Kolarms is now offering a high quality AK47/ AKM kit with all new parts so you can build your favorite rifle at home. This kit provides you with most of the parts needed to build your new rifle with all NEW parts. You will need the following to finish the project: Gas piston rivet, 7mm barrel pin, AK47 Stamped receiver, Barrel & Magazine.

These kits are great for your next home build or store these for back up parts for your existing collection of AK based firearms. The KAM -17 parts a grey phosphate finished & very neatly packaged, great for long term storage. Stock up now for a Rainy Day as the new administration may shut down AK47 Kit imports in the near future and surplus kits are drying up. 


  • All kits that we headspace will ship with a drilled gas port.

  • During assembly, it is normal for tools and machines to cause minor cosmetic scratches to the original parts finish.
    Most commonly, drilling any holes will cause metal shavings to scratch paint around the hole, and hammering any pins in with a punch will remove finish from the pin.
  • In order to complete your build, you will need to remove your barrel from the trunnion, rivet the trunnion into your receiver, then press the barrel back in.
    We pre-drill the barrel pin hole so you are able to use that as a guide when pressing your barrel back in.

    Go/No-Go gauges must then be used to verify headspace before fully installing your barrel pin.
  • Your kit is 100% head-spaced correct out of the box. We perform a series of checks across several team members prior to every order shipping out.
    If you have concerns, you must check headspace BEFORE changing anything about the headspaced assembly using GO/NO-GO GAUGE!!!

    If you have questions, please take pictures, and/or video, and reach out to us.
  • Once the barrel is removed, or any alteration has been made to the populated barrel, at that point the customer or builder becomes responsible for the build. AOA cannot take responsibility for a headspaced assembly once alterations have been made to our gunsmith's work.
    Removing the barrel and reinstalling it may result in head-space loosening or tightening of your pre-head spaced kit if you are only eyeballing the barrel pin hole. It can look lined up, but still be off by a few thousandths of an inch.
  • Recheck head-space after you are done riveting your trunnion into your receiver and reinstall the barrel, and ensure it is correct BEFORE pressing the barrel pin.

    **If you need to send an assembly back, we will charge another headspacing fee. We also cannot accept receivers, so if it needs to be sent back in, you must remove the receiver if it has already been riveted.
  • Once all built, please clean your firearm before firing to make sure your new firearm is clear of assembly or shipping debris. If your assembled firearm is failing to cycle, sometimes metal burrs may get lodged in the gas port and need to be cleared out.
    Thank you again.



  • 3
    Some damaged parts

    Posted by Nicholas on Apr 2nd 2021

    No complaints about the shipping or customer service you guys are spot on and doing a great job my only complaint is with the kit itself some of the parts are poor quality and damaged I'll definitely have to replace some of them but other than those few parts it's a great overall kit and I'm excited to start building.

  • 5
    Kolarms KAM-17 Gen 2, parts kit

    Posted by Bill Maas on Mar 31st 2021

    Very nice kit and all the parts seem well made. I haven't checked tolerances, but good manufacturing and tooling.

  • 5

    Posted by Matthew Wisniewski on Mar 30th 2021

    Brand new kit. Quality parts. One of the better ones out there. To bad there all sold out.

  • 5
    Check AK

    Posted by Earl Carter on Feb 7th 2021

    Gun looks new, but I wouldn't buy another one, nothing wrong, just not for me

  • 5
    Kolarms ak kit

    Posted by Scott on Feb 6th 2021

    Very complete kit. High quality. They take out the front trunnion and mill it to 23mm. Even includes all the rivets, receiver cross member rivet, and semi auto trigger group that are not in most kits.

  • 5

    Posted by Matthew C. Diem on Jan 24th 2021

    Is it possible to order without headspaced barrel? Can't add to cart.