(R)ecoil(R)eduction(D)evice(2) ports(C)ompensator(14)14-1LH thread pitch(F)aceMount(KM)KeyMount
In order to use this device with a suppressor, it must be installed by a professional - to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods. JMac Customs is not responsible for any damage to the suppressor, or any injury resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use.
The RRD-2C is a shortened version of the RRD-4C by removing the 2 smallest ports creating a more compact package!
At 2.23" it still adds 1.53" and can be permanently attached to a 14.5" barrel to achieve 16" OAL
THIS REQUIRES FACE SHIMS OR FACE MILLING TO BE INSTALLED!!
- 14-1LH Threads
- KeyMo & KeyMicro Suppressor compatible
- 10mm Bore
- 2.23" Long
- 17-4ph Stainless Steel
- Black Nitride
JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact us if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.
