ALG Trigger- ULTIMATE with Lightning Bow (AKT-UL) $140
Brand : ALG
- SKU:
- 7825
- Maximum Purchase:
- 10 units
The ALG AK Trigger Ultimate with Lightning Bow (AKT-UL) is a single stage trigger is designed for the AK47 and AK74 variant platforms. The AKT-UL features a shorter pull and a crisper reset than the AKT standard version which is ideal for precision and target shooting. It is machined from gun quality alloy steel.
The AKT-UL features the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT-UL is proudly made in North Wales PA, USA, and lends three parts towards 922(r) Compliance.
Note: The ALG AKT (EL/UL) is not compatible with the 12 Gauge and 308 / 7.62x54r variants
-
The AK Trigger Ultimate with Lightning Bow (AKT-UL) is a single stage trigger is designed for the AK47 and AK74 variant platforms.
The ALG Defense AK series of triggers were designed to work with most AK variants without fitting. With AK variants that have a rivet for the rear of the trigger guard, commonly acting as an anti-slap feature, this rivet should be no greater than 0.062 inches tall. Our AK series of triggers are designed to work with rivets that are 0.062 inches in height or less. If this rivet is higher than 0.062 inches, the rivet will have to be shaved down to allow for more clearance. Having improper clearance can result in damage to the disconnector itself.
Alternatively, if the user does not choose to modify the rivet, you can opt to modify the underside of the disconnector to increase the clearance between the bottom of the disconnector and the rivet in the receiver. It is not recommended to completely remove the tail of the disconnector as adverse issues may arise, such as trigger slap. Most users prefer to bevel (angle) the disconnector in the area that would contact the rivet. We recommend shaving down the rivet, not the disconnector tail.
Please note, we do recommend having a qualified gunsmith install and perform all fitting of fire control groups. AK receivers and parts coming from a wide origin of manufacture vary, there is no agreed upon set specifications. As such, fitting may be required. Please note the rivet and/or disconnect will need the proper clearance as per the chart below, failure to have the correct clearance will cause damage.“
Installation Instructions
-
The Best FCG
This might be a little more than other FCGs, but just save yourself the time and money now because once you shoot a friend's gun with one of these, you will be ordering one as well!
-
ALG trigger
As always excellent I have one in every Ak I own. It’s my favorite trigger
-
BEST/LIGHTEST TRIGGER ON THE MARKET.
I have yet to try a CMC trigger on an AK platform but was debating between this ALG-UL and the CMC 2.0 elite 2.5 lb. Got to say, I do not regret this purchase. I get a clean light break with no takeup! My manual trigger weight gauge measure in constant at 2lb with the lightest recorded pull weight was 1.5lb. Great trigger and does come with a accessory spring incase that trigger pull weight is to light for your liking. Installed on a PAP92 and some fitting was required (shave down the detent just a tad and it sits perfect). WOULD RECOMMEND! A+
