AK Buff Buffer Rubber Block - Compatible with most AK variants!

New from War Services & AOA! Based on the Mini & Micro Draco buffers that are vital to their function.

These cast rubber buffers were designed first as a replacement to the factory buffers required for function of Mini and Micro Draco AK pistols, which serve to keep the bolt carrier from jumping out of the rails due to their short gas piston.

In addition, we modified the design to allow these buffers to fit into almost any other AK variant, taking into consideration different needs of different designs. Part of this design incorporates the arms which hold onto the recoil spring, but without the need to squeeze the buffer over the whole recoil assembly like other buffers. Countless prototypes were tested and ran in rifles to reach this final design.

NEW: Short Red Buffer is about half the length of our other buffers, and with longer thicker arms. This buffer was designed to offer additional fitment options, and also to help apply pressure to the rear of loose dust covers and reduce or eliminate wobble and rattle. This buffer matches the Orange buffer hardness level.
We noticed a huge improvement on a new SAM7 UF with a loud rattling dust cover, and also variants using hinged dust covers become very sturdy.

NEW: Dust Cover Gasket - Based on the Galil ACE gasket, this prevents gas from leaking out through the recoil spring hole in the dust cover. The main use for this is when running a suppressor. Easily slips over the recoil spring button, then just close the dust cover over it.

Even if your AK does not require a buffer for function such as those with short pistons, these buffers will reduce wear and tear on your firearm, and also increase cycle rate, with the carrier having a shorter distance to travel.

We have tested fitment in: Draco variants, Mini Beryl, Beryl Rifle, Milled WBP and Arsenal, Maadi, Saiga, RPK, Yugo pistols, KUSA KP-9 Vityaz, and more.
*Will not fit the PSL due to completely different bolt carrier/rails, and do not recommend in shotguns as it will cause short stroke. Confirmed to impair function in a Vepr 12.
**New Short Red buffer may work in PSL but we do not have one on hand to confirm.

Each color has a different hardness level. These are what we recommend most suitable, but they are all interchangable:
Green: 9mm or other Pistol Calibers - the flexibility helps makes these an easy install in KUSA 9mm platforms.
Orange: 5.45, 5.56, 7.62x39
Blue: 7.62x39, .308, 7.62x54r
Red: All calibers

Installation is simple and quick: