Polish Radom (11) Military Surplus Fixed Stock Parts Kit! *HEADSPACED*

Brand :

(7 reviews) Write a Review
$990.00 - $1,089.99
SKU:
9005
Availability:
**ALL HEADSPACED KITS WILL CARRY A LEAD TIME - Current expected lead times can be found in our FAQ**

Headspaced in-house! We are only offering these with an FB Radom Chrome Lined barrel.

Cost Breakdown includes the Kit + Barrel + Headspacing work, which includes proffessional demil of barrel components in order to populate and headspace.


Polish AK47 Parts Kit Wood Fixed Stock from the original Radom military factory in Poland. These are Original Polish Military AK47 rifles that have been demilitarized and broken down into parts.

Condition is very good to excellent with all major matching numbers guaranteed (Dust Cover, Gas Tube, Bolt, Bolt Carrier, Trunnion) with high chance of other numbers matching as well (Recoil Rod, Rear Sight).

Hand Select option for rare 1960's era kits with blued finish, and white bolt carrier. Hardwood stock upon request but stricktly subject to inventory, we are finding very few hardwood stock sets. Many early kits have a mixture of both wood types on the same rifle, but we will fulfill to the best of our ability for hand select requests, as long as you ask for it during order checkout (Notes section is at the bottom of the Shipping step!)

These kits were issued so expect wear, but they are still fully operational. 


You will still need to purchase a receiver, rivets, and possibly other small parts to complete this. These are original full auto Military rifles so you must comply with 922r and build this rifle in semi auto.

*Auto rate reducer, reducer spring, curved sear, trip spring, and 3rd pin removed for kits going to the following states:
CA
NY
WA
CT
MA

*Some of these are also oversized barrel trunnions, so it's possible you will need to get an oversized barrel. We can check the trunnion upon request if you place it in the notes PRIOR TO CHECKOUT, requests made AFTER order is placed may not be honored due to order volume.

Please Note

Due to the vast differences in manufacturing specs & tolerances of surplus AK platform kits, we cannot guarantee any specific size part (ex; trunnions,etc) with kits. 
Surplus Pistol grip color and condition may vary
Surplus Wood may vary from Hardwood to Laminate. Finish and condition may Vary.
Bolt and carrier may be painted black or polished metal in the kit that is sent to you. These are military kits and there is no choice of bolt finish.
Small parts like pins, rivets, & small springs should be included, but may be missing.
Kits do not include a Barrel or Receiver but, will contain all other large parts. 
Kits may have Cosmoline or grease from Military storage and will need cleaning.
These kits are demilitarized from actual working guns and may show demilling markings. 
Parts specs may vary slightly from kit to kit (including trunnion size). 
Kits may require additional fitting(ex:knurling, over-sized pin installation, minor welding, etc.) to complete your build. 
We cannot guarantee the fitment of any parts due to the inherent variables associated with the AK platform kits.
Kits should be assembled by a skilled builder with knowledge of the Kalashnikov line and building practices.

HEADSPACING DISCLAIMER:

  • All kits that we headspace will ship with a drilled gas port.

  • During assembly, it is normal for tools and machines to cause minor cosmetic scratches to the original parts finish.
    Most commonly, drilling any holes will cause metal shavings to scratch paint around the hole, and hammering any pins in with a punch will remove finish from the pin.
  • In order to complete your build, you will need to remove your barrel from the trunnion, rivet the trunnion into your receiver, then press the barrel back in.
    We pre-drill the barrel pin hole so you are able to use that as a guide when pressing your barrel back in.

    Go/No-Go gauges must then be used to verify headspace before fully installing your barrel pin.
  • Your kit is 100% head-spaced correct out of the box. We perform a series of checks across several team members prior to every order shipping out.
    If you have concerns, you must check headspace BEFORE changing anything about the headspaced assembly using GO/NO-GO GAUGE!!!

    If you have questions, please take pictures, and/or video, and reach out to us.
  • Once the barrel is removed, or any alteration has been made to the populated barrel, at that point the customer or builder becomes responsible for the build. AOA cannot take responsibility for a headspaced assembly once alterations have been made to our gunsmith's work.
    Removing the barrel and reinstalling it may result in head-space loosening or tightening of your pre-head spaced kit if you are only eyeballing the barrel pin hole. It can look lined up, but still be off by a few thousandths of an inch.
  • Recheck head-space after you are done riveting your trunnion into your receiver and reinstall the barrel, and ensure it is correct BEFORE pressing the barrel pin.

    **If you need to send an assembly back, we will charge another headspacing fee. We also cannot accept receivers, so if it needs to be sent back in, you must remove the receiver if it has already been riveted.
  • Once all built, please clean your firearm before firing to make sure your new firearm is clear of assembly or shipping debris. If your assembled firearm is failing to cycle, sometimes metal burrs may get lodged in the gas port and need to be cleared out.
    Thank you again.

 

Link to these rifles on Facebook before they were demilled

  • 5
    Great parts

    Posted by Shane Dodson on May 18th 2023

    Whole thing was perfect not a thing missing

  • 5
    Circle 11 Parts KIt

    Posted by Unknown on May 6th 2023

    In very nice shape, appears to have all parts needed to build a complete rifle and all the serialized parts are matching.

  • 5
    Very nice kit

    Posted by Jason Bliss on Jun 22nd 2022

    Hope. Put two gether one day

  • 5
    1969 polish radom circle 11

    Posted by Gregg Seehase on Mar 3rd 2022

    Just got my parts kits very nice. The wood is laminated and doesnt hardly look used. I got more than the 3 matching parts the gas tube and recoil spring were also matched. The gun looked like it was hardly used. I would definitely recommend getting one of these. Thanks again aoa another great product.

  • 4
    polish parts kit

    Posted by brandon pellervo on Feb 27th 2022

    Over all I'm happy with it except I'm a little concerned about the barrel pin hole, it was sloppy drilled and one side is severely ovaled. And it looks like it already has an over sized pin started in it. Fingers crossed it wont be an issue.

  • 5
    Polish Radom parts kit

    Posted by Ethan Kerber on Nov 18th 2021

    Parts showed up and my god it’s beautiful. New to AK’s but understand them. My first one and it makes me want another one. Overall impressed and can’t wait to get it finished.

  • 5
    Excellent

    Posted by Harrison Shreve on Nov 13th 2021

    took 4 weeks to get the kit to my door. the kit was a 1969, all numbered parts matching. wood was all laminate, and in decent condition. bolt carrier and bolt were in the white. would order again.