Romanian Mod 63 - AK47 Parts Kit **Headspaced** on US Nitride Barrel

SKU:
6005
Availability:
**All Headspaced kits carry a lead time in accordance with our shipping banner**
$724.95 - $975.00
(20 reviews) Write a Review

**Please note: at this time we are not offering Romanian Surplus headspaced kits on our Chrome Lined barrels due to gas block fitment issues, we are only offering Nitride barrels for these Romanian Surplus kits. Please do no call or email to request to change the barrel for headspacing as it will be denied.

These Romanian Military AKM47's are some of the last original Military rifles we could find overseas.
Carefully demilled and offered in a variety of grades. These kits were issued so expect wear but they are still fully operational. They will have finish wear and possibly carvings, cracked upper handguards, small dents, and dings in parts and or the wood furniture.

Higher grades and later years will see less instances of wear and tear.

CAT II kits are guaranteed to match all major serial numbers, have nicer finishes with less wear, and are mostly later year kits 70's-80's

Early 60's kits (63 and 64) may have cracked wood, especially palm swell handguards. These kits are guaranteed to have major matching parts (Bolt, Carrier, Trunnion). Other minor parts are not checked for numbers, and may or may not match.

You will still need to purchase a receiver, rivets, and possibly other small parts to complete this. These are original full auto Military rifles so you must comply with 922r and build this rifle in semi auto.
*Auto rate reducer, reducer spring, curved sear, trip spring, and 3rd pin removed for kits going to the following states:
CA
NY
WA
CT
MA

HEADSPACING DISCLAIMER:

  • During assembly, it is normal for tools and machines to cause minor cosmetic scratches to the original parts finish.
    Most commonly, drilling any holes will cause metal shavings to scratch paint around the hole, and hammering any pins in with a punch will remove finish from the pin.
  • In order to complete your build, you will need to remove your barrel from the trunnion, rivet the trunnion into your receiver, then press the barrel back in.
    We pre-drill the barrel pin hole so you are able to use that as a guide when pressing your barrel back in.

    Go/No-Go gauges must then be used to verify headspace before fully installing your barrel pin.
  • Your kit is 100% head-spaced correct out of the box. We perform a series of checks across several team members prior to every order shipping out.
    If you have concerns, you must check headspace BEFORE changing anything about the headspaced assembly using GO/NO-GO GAUGE!!!

    If you have questions, please take pictures, and/or video, and reach out to us.
  • Once the barrel is removed, or any alteration has been made to the populated barrel, at that point the customer or builder becomes responsible for the build. AOA cannot take responsibility for a headspaced assembly once alterations have been made to our gunsmith's work.
    Removing the barrel and reinstalling it may result in head-space loosening or tightening of your pre-head spaced kit if you are only eyeballing the barrel pin hole. It can look lined up, but still be off by a few thousandths of an inch.
  • Recheck head-space after you are done riveting your trunnion into your receiver and reinstall the barrel, and ensure it is good BEFORE pressing the barrel pin.

    **If you need to send an assembly back, we will charge another headspacing fee. We also cannot accept receivers, so if it needs to be sent back in, you must remove the receiver if it has already been riveted.
  • Once all built, please clean your firearm before firing to make sure your new firearm is clear of assembly or shipping debris.
    Thank you again.

Reviews

  • 5
    Romanian parts kit

    Posted by Joe on May 31st 2022

    Good fit on all, made a great frankenrifle!

  • 5
    Cat 2 Romanian Headspaced Kit

    Posted by Mitch on Mar 7th 2022

    Nearly pristine. Very few wear marks outside and the internal parts look to have less than a thousand rounds on them. Took a while to ship but the wait was absolutely worth it. Would absolutely order again

  • 5
    Very nice kit.

    Posted by Unknown on Feb 28th 2022

    Every part looks good. Very usable. Looking forward to the build. Will probably get another from AOA

  • 5
    Mod. 63 kit.

    Posted by Dan Zelna on Feb 17th 2022

    As usual the kit contents are all extremely high quality !!

    I wouldn't buy a kit from anyone but A of A !!!

    You have one happy customer in me !!

  • 5
    Romanian Mod 63 Headspaced

    Posted by Unknown on Feb 9th 2022

    The parts were in good condition, from later production stock like I requested, which is awesome. Furniture has some names carved into it, which is neat (not that I'll be using it) and the metal parts all have the original black finish on them. I'm overall very pleased with the kit, compared to the first one I ordered that was older, and worn silver, as cool as that looks.

  • 5
    Romanian AKM parts kit

    Posted by Phil Lovelace on Jan 29th 2022

    I'm always pleased with the quality of products and customer service. If something is wrong or missing in your order, they make it right immediately! The only place I will buy a kit.

  • 5
    Parts Kit

    Posted by Dan Zelna on Jan 18th 2022

    Top quality kit !
    Arms of America never fails to please ! I won't look anywhere else for my builds !

  • 5
    Mod63 kit

    Posted by Drew on Nov 18th 2021

    Always fantastic products and great customer service

  • 5
    Mod. 63 kit.

    Posted by Dan Zelna on Nov 10th 2021

    Outstanding kit ! Can't wait to get another !!