These Polish 5.45&5.56 80% receiver blanks are 100% made in Poland using original Polish Radom Military tooling and parts. This is the closest you can get to an original military receiver! These 80 percent receivers already have both the rails and center support fully installed, and they are fully heat-treated with a black oxide finish. Polish selctor markings are pre-stamped.
These are considered 80% complete so they do not require a FFL dealer since they are missing the axis pin and safety selector lever hole.
These are 1.0 mm and work with all the AK 5.56/5.45 parts kits we sell on the website!
**NOTE: Some minor fitting/filing may be required depending on your kit. The magwell is sized to accomidate both 5.45 and 5.56 mags, but once the trunnion is in place you may need to do some additional filing on the magwell. We have found that occasionally 1-2mm of material might need to be filed towards the rear, if you are unable to insert mags after installing the trunnion.
We are not shipping these to NJ currently due to their ban on 80% receivers.
-
Just like the first one
Ordered a second one to keep the other one company, both are quality products.
-
Works very well
Got this and it really stacks up to the add. The only issue was the center support, I had to drill it out just like the 7.62x39 because I have the old style receiver jig from AK Builder but it worked out great. Installed a new Center support with no problem, will be finished soon
-
80% receiver blanks
Very strong and well done
-
Mag opening requires some work for my double 10 . Haven't tried the >223 Yugo's yetet
Great value for the money
-
80 Receiver
Awesome receiver, package very well and delivery fast. Stock up while you can
-
80% AK 5.45/5.56
This is a nice looking 80% that will make a great looking gun.
-
80%
Good receiver. I doesn’t have the full auto lower rail like the Childers receiver.
-
Polish Radom 5.45x39/5.46/.223 80% Blank
well made, material used is military grade, matte black anodized finish is excellent, Polish selector markings (no notches), center support installed, spot welds perfect, XY dimples on right spots, worth the money.
-
Awesome looking reciever
Only suggestion I have is sell/provide a hole locator to finish the receiver. I made my own from an old flat that has the holes in place
-
None better
These receivers are straight and appear to be very high quality. The bends and pressings are crisp and clean. Folks in that part of the world have been making receivers like this for a very long time and it shows in the product.
-
I THINK THERE GOOD QUALITY
COATING LOOKS REAL GOOD ALSO
-
WPB Polish 80% receiver blank
Very nice 80% AK receiver