Romanian Mod 63 - AK47 Parts Kit **Headspaced** on US Nitride Barrel

**Please note: at this time we are not offering Romanian Surplus headspaced kits on our Chrome Lined barrels due to gas block fitment issues, we are only offering Nitride barrels for these Romanian Surplus kits. Please do no call or email to request to change the barrel for headspacing as it will be denied.

These Romanian Military AKM47's are some of the last original Military rifles we could find overseas.
Carefully demilled and offered in a variety of grades. These kits were issued so expect wear but they are still fully operational. They will have finish wear and possibly carvings, cracked upper handguards, small dents, and dings in parts and or the wood furniture.

Grades:

BFPU Non-Matching: These may have minor issues such as finish wear, front sight post tweaked in, and typical battlefield issues like cracked upper handguards. These rifles were selected by our agent out of a lot of Cat 3/Battlefield Rifles so expect parts and furniture to show wear similar to our Military Battlefield Md 63's. That could include carvings in the stock sets/trench art, rust, finish wear, dents/dings in the dust cover, tweaked front sight posts/ears pushed inwards, and cracks in the upper hg. The rifles we received are still in fully functional condition and our selection was focused on selecting rifles perfect for builds that still have a long life ahead. We recommend choosing this grade for those who are experienced with repairing parts. Non-matching kits may come with palm swell handguard instead of dong. Cracked upper handguards is also common.

Matching Numbers: We guarantee matching bolt, bolt carrier, and trunnion. Other parts may match but cannot be guaranteed. Finish may range from BFPU grade or better, but less than CAT II grade.

CAT II All Matching: CAT II kits were issued but are still in excellent condition, standing apart from other matching kits with their excellent finish. We guarantee matching bolt, bolt carrier, dust cover, gas tube and trunnion. Some parts may be non-serialized and would be considered matching.

Very Good Non-Matching: CAT II condition kits but some of the parts do not have matching serial numbers.

Early 60's kits (63 and 64): nearly all kits have cracked hardwood furniture (buttstock), all palm swell handguards will have cracks. The 1964 year kits now come with dong handguards. These kits are guaranteed to have major matching parts (Bolt, Carrier, Trunnion). Other minor parts are not guaranteed to match. 1963 was the first year of production for these kits so these are the oldest possible Romanian Md63 kits and very rare to come by!

You will still need to purchase a receiver, rivets, and possibly other small parts to complete this. These are original full auto Military rifles so you must comply with 922r and build this rifle in semi auto.
*Auto rate reducer, reducer spring, curved sear, trip spring, and 3rd pin removed for kits going to the following states:
CA
NY
WA
CT
MA

HEADSPACING DISCLAIMER:

• All kits that we headspace will ship with a drilled gas port.
  
  
• During assembly, it is normal for tools and machines to cause minor cosmetic scratches to the original parts finish.
  Most commonly, drilling any holes will cause metal shavings to scratch paint around the hole, and hammering any pins in with a punch will remove finish from the pin.
  

• In order to complete your build, you will need to remove your barrel from the trunnion, rivet the trunnion into your receiver, then press the barrel back in.
  We pre-drill the barrel pin hole so you are able to use that as a guide when pressing your barrel back in.
  Go/No-Go gauges must then be used to verify headspace before fully installing your barrel pin.
  

• Your kit is 100% head-spaced correct out of the box. We perform a series of checks across several team members prior to every order shipping out.
  If you have concerns, you must check headspace BEFORE changing anything about the headspaced assembly using GO/NO-GO GAUGE!!!
  If you have questions, please take pictures, and/or video, and reach out to us.

• Once the barrel is removed, or any alteration has been made to the populated barrel, at that point the customer or builder becomes responsible for the build. AOA cannot take responsibility for a headspaced assembly once alterations have been made to our gunsmith's work.
  Removing the barrel and reinstalling it may result in head-space loosening or tightening of your pre-head spaced kit if you are only eyeballing the barrel pin hole. It can look lined up, but still be off by a few thousandths of an inch.

• Recheck head-space after you are done riveting your trunnion into your receiver and reinstall the barrel, and ensure it is correct BEFORE pressing the barrel pin.
  
  **If you need to send an assembly back, we will charge another headspacing fee. We also cannot accept receivers, so if it needs to be sent back in, you must remove the receiver if it has already been riveted.

• Once all built, please clean your firearm before firing to make sure your new firearm is clear of assembly or shipping debris. If your assembled firearm is failing to cycle, sometimes metal burrs may get lodged in the gas port and need to be cleared out.
  Thank you again.